How to Set Up a Geyser Connect Schedule

Follow these steps to set up a Geyser Connect schedule in the Sensor Connect app:

1. Open the Sensor Connect app
2. Click on your Geyser Connect in the Devices list
3. Click on Schedule in the navigation tab at the bottom of the screen
4. The Set Schedule view will show every day of the week, with two geyser schedule slots, AM (morning) and PM (afternoon/evening). By default, these are set to "00:00 to 11:59" for AM and "12:00 to 23:59" for PM. Keeping these settings means your Geyser Connect schedule is set to 24-hour geyser heating.
5. Click on a day of the week to set up that specific day's schedule. For example: Click on "Mon" for Monday.
6. The day schedule screen shows two options, AM and PM, with AM selected (in orange) by default.
7. Click on the Start section for the AM session you have selected, and type in the desired Start/End time (hh:mm).
8. Now click on the End section for the AM session you have selected, and type in the desired Start/End time (hh:mm).
9. Next, click on the PM session at the top of the screen, it should go orange if selected.
10. Click on the Start section for the PM session you have selected, and type in the desired Start/End time (hh:mm).
11. Now click on the End section for the AM session you have selected, and type in the desired Start/End time (hh:mm).
12. Click on Save to apply the heating schedule for this day only, or click on Save to ALL days to apply this schedule to the entire week.

Keep in mind that you may want to set up a different heating schedule for weekends, for example, or for weekdays when you know you'll need a lot of hot water.

Once saved, you'll see a summary of your Geyser Connect schedule, and the geyser will only heat water during these times.

Important

• Using the Geyser Connect schedule is the best way to turn your geyser ON/OFF automatically. Set your preferred times and update it when needed.
• Even when your Geyser Connect device is disconnected, it will still remember your heating schedule.
• This is the preferred method to using the ON/OFF button on the Geyser Home Screen, as this may result in you turning off the geyser and being unable to turn it back on when the Geyser Connect device is temporarily disconnected.
• You can only set up one AM and one PM heating time slot per day (advanced geyser scheduling coming in 2025!). If you don't want your Geyser Connect to heat up during that time slot, simply set the Start and End times to be the same (00:00 to 00:00 and 12:00 to 12:00, for example).

Need Help?

For any assistance with the Sensor Connect app, please contact Sensor Connect product support on the details below:

Tel: 021 201 1168
Whatsapp: 066 485 7148
Email: support@sensorconnect.co
Website: sensor.energy
Other help articles: sensornetworks.co.za/help-articles/